Clean-Co Systems Offers Patented Injection Cleaning System for Heat Exchangers, Boilers, Tanks, Reactors and Piping

Clean-Co Systems Industrial Service Company is committed to providing the highest quality of work with the highest degree of safety for our valued customers, employees, and the communities they support. Our objective of excellence will be realized through rigorous training, thorough planning and flawless execution. Clean-Co Systems is one of the leading industrial and specialty cleaning companies in Houston, Texas. We have some of the largest ultra high pressure water blasting machines in the United States and a patented process that is definitely a step above the rest. Clean-Co Systems offers quality performance with an excellent safety record of five years without a recordable. We also offer 24-hour on call Nationwide service.

A twenty-percent reduction in cost could be realized by using the Multi-Phased Hydroblaster, developed by Clean-Co Systems, Inc., if standard hydroblasting was used in prior projects. Standard Hydroblasting is not always the answer. Planning and scheduling a shutdown or turnaround is not a small task. Every detail has to be considered and calculated in order to complete a project within the estimated budget. In most cases, using actual time and labor costs of previous projects are influential in establishing the new budget expectations. The Multi-Phased Hydroblaster, developed by Clean-Co Systems Inc., combines their patented injection cleaning system and NA-184, a stable hydrolyzed ionic water hardener. This system creates a soft abrasive in the water, (water hardener) that evaporates, just like water, leaving no residue. The surface is ready to paint or be put back into service.

The feed rate of NA-184 water is 100 parts per million (PPM). It is non-toxic and environmentally safe. It is also undetectable during the cleaning process or upon completion. The hydrolyzed ionic water causes debris and waste deposits to literally stick to the droplets and rinse off in one application. A 50% larger nozzle is utilized, removing more material much faster. A 20 percent reduction in time to complete a project can add up to 20 % savings overall. When high pressure is needed to cut through high or low density polymers, rubber, coke, or scaling, Clean-Co Systems Inc. can “pump up the volume” with 400 horsepower and twelve gallons per minute of flow. (G.P.M. = depth of cut) Compared to four gallons per minute from conventional systems, Clean-Co Systems Inc. can reduce time and cost on even the toughest jobs.

A recent demonstration of the cutting power of the patented Multi-Phase Hydroblaster was performed at the headquarters of Clean-Co Systems Inc. Industrial Service Company in Houston, Texas. The hydroblast technician cut a three-foot diameter ball of high density polymer in half. Starting on one side and working through to the other, the process took a little over six minutes to complete. It was very impressive! The next demonstration was the Multi-Phase’s ability to prepare surfaces for painting and resurfacing. Using an old heat exchanger with an industrial coating, the hydroblast technician cleaned a twelve inch square area down to bare metal in mere seconds. The Multi-Phase Hydroblaster will even cut concrete.

Baytown, Texas – CleanCo Systems Industrial Service Company (CCS) recently received recognition for working “Injury Free” for over 15,000 man-hours at the ExxonMobil Baytown Complex. The award marks the ninth consecutive year CCS has worked injury free for the complex and has complied over 130,000 injury free man-hours in the process.

Lynn Spell, General Manager of CCS and company liaison to the ExxonMobil Baytown Complex, was on hand to receive the award on behalf of the entire CleanCo crew. According to Mr. Spell, CleanCo Systems performs high-pressure water blasting for the cleaning of shell and tube heat exchangers as well as fin fan, air cooled heat exchangers for the complex. “We also support the waste water control by providing our liquid-vac vacuum truck services during the cleaning process,” Spell explained.

CleanCo Systems maintains an outstanding safety record through out the company via quality safety training at every level. All supervisors are 30 Hour OSHA General Industry trained and all employees have to go through an initial 40-hour safety program prior to entering the field as a “Hydro-Blast Technician”. Each shift starts off with a safety meeting and a Job Safety Analysis (JSA) and a Job Hazard Analysis (JHA) prior to beginning work.

“The safety of our workers and the workers around us is our top priority,” commented Mickey Rooney, Founder and President of CleanCo Systems. “We have invested in the best and safest equipment and training money can buy in order to reduce the amount of risk in an already risky profession.”

For more information on the wide range of specialty services CleanCo Systems provides to industry, please visit www.cleancosystems.com.

ExxonMobil recognizes Clean-Co Systems for outstanding safety practices.

Exxon Mobil Baytown Complex hosted the 2004 Contractor Awards Banquet to honor the contractors and service providers that achieved a perfect safety record for the year. The safety theme for ‘04 was “NOBODY HURT”, and the message was well received. Jonathan Yarbrough, Site Mechanical Manager, announced to the crowd that the entire complex had a 40% reduction in TRIR’s to finish the year at 0.15.

Clean Co Systems has won this award for the past 7 years and has had 10 years with no recordables at ExxonMobil.

CleanCo Systems Industrial Service Company did their part to lower the TRIR by working 13,000 man hours without a recordable. Mick Rooney, President and CEO and Lynn Spell, General Manager, were on hand to receive the prestigious award. CleanCo Systems has been under contract to ExxonMobil since 2000 and has a TRIR of “Zero”.

Clean-Co Systems Managers recently participated in Supervisor Training

All Clean-Co Managers and onsite Supervisors are now 30-Hour OSHA trained.

Clean-Co Systems, Inc. Announces New Heat Exchanger Cleaning Facility

CleanCo Systems, Inc. Houston, Texas – High-pressure Hydro-blasting leader, Clean-Co Systems, Inc. announces the opening of their new Heat Exchanger Cleaning Facility. Located just east of Houston on Interstate 10, (Channelview) the large facility is equipped with a 100,000 lb. overhead crane for safe handling of the exchangers. The latest technology in high pressure Hydro-blasting and Water-lancing is the primary means of achieving maximum cleaning results. Shell Side and Tube Side exchangers are remotely controlled and cleaned by a trained technician. The highest priority of safety and environmental responsibility is the key element in the design of the new facility. It is eco friendly with an on site waste water treatment plant.

When a chemical plant or refinery has the opportunity to send their exchangers off site, they reduce their exposure to risk considerably. The controlled environment of CleanCo Systems Heat Exchanger facility eliminates odor releases and “aerosol” drifts that normally occur with field cleaning at the chemical plant or refinery.

For more information on this and other industrial cleaning capabilities of CleanCo Systems, please call 281-452-1288.

• 16308 Avenue C - Channelview, Texas 77530
• 2395 W. Cardinal Drive – Beaumont, TX 77705
• Baton Rouge, Louisiana
• Odessa/Midland, TX

CleanCo Systems, Inc. Houston, Texas – High-pressure Hydro-blasting leader, Clean-Co Systems, Inc. announces the opening of their new Heat Exchanger Cleaning Facility. Located just east of Houston on Interstate 10, (Channelview) the large facility is equipped with a 100,000 lb. overhead crane for safe handling of the exchangers. The latest technology in high pressure Hydro-blasting and Water-lancing is the primary means of achieving maximum cleaning results. Shell Side and Tube Side exchangers are remotely controlled and cleaned by a trained technician. The highest priority of safety and environmental responsibility is the key element in the design of the new facility. It is eco friendly with an on site waste water treatment plant.

When a chemical plant or refinery has the opportunity to send their exchangers off site, they reduce their exposure to risk considerably. The controlled environment of CleanCo Systems Heat Exchanger facility eliminates odor releases and “aerosol” drifts that normally occur with field cleaning at the chemical plant or refinery.

For more information on this and other industrial cleaning capabilities of CleanCo Systems, please call 281-452-1288.

Download our job application here.

Please complete and fax to: 281-452-1293

This post is password protected. To view it please enter your password below:

Password:

Atofina Polymers Demonstration

Click here to view

Clean-Co Systems Services Overview

Click here to view

Clean-Co Systems Hydroexcavation Services

Click here to view

Tank Cold Cut Demonstration

Click here to view

Dry Ice Blasting Demonstration

Click here to view

Crawler Paint Prep Demonstration

Click here to view

]]> http://cleancosystems.com/wordpress/?feed=rss2&p=139 0 http://cleancosystems.com/wordpress/?p=136 http://cleancosystems.com/wordpress/?p=136#comments Mon, 08 Mar 2010 15:09:55 +0000 admin http://cleancosystems.com/wordpress/?p=136

Please complete the form below. We look forward to hearing from you.

This post is password protected. To view it please enter your password below:

Password: